![Image](http://www.postimage.org/gx15G7F9.jpg)
BED BAR!!!!!
- Desert_Dragon
- Intermediate
- Posts: 638
- Joined: Fri Aug 01, 2008 9:00 am
- Location: Abu Dhabi
- Location: ABU DHABI
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
-
- Posts: 1391
- Joined: Sat Apr 26, 2008 9:00 am
- Location: Abu Dhabi
- Location: Work.....as allways
- Contact:
- heinz
- Advanced
- Posts: 621
- Joined: Thu Aug 21, 2008 9:00 am
- Location: Abu Dhabi
- Location: gone sailing...
- Contact:
- Desert_Dragon
- Intermediate
- Posts: 638
- Joined: Fri Aug 01, 2008 9:00 am
- Location: Abu Dhabi
- Location: ABU DHABI
heinz wrote:I was at the car shops on Salam street... i saw a bed bar there, i think it was for a Toyota Hilux, but maybe they can point you in the right direction...
Heinz that was for Toyota pick up 2.4L 8O
TINTIN to mountain light bar and for safety reason... i want it to be heavier from the back so the tires wont slipping...Also, for off road looks
![Wink :wink:](./images/smilies/icon_e_wink.gif)
Kalemero where is black scorpion???? location and phone number ... call me i lost ur number though loool
iguana i tried to order through internet but it's only ship to USA
Dodge Ram 2007 my First toy at AD4X4
Now Ford Raptor 2012
Now Ford Raptor 2012
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
- heinz
- Advanced
- Posts: 621
- Joined: Thu Aug 21, 2008 9:00 am
- Location: Abu Dhabi
- Location: gone sailing...
- Contact:
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
Check Performance Parts www.performanceparts.com they have it and they ship to UAE. I ordered some parts for my Durango from there.
This is the link for your bed bar
http://www.performancepartswholesale.co ... 0104&Nty=1
This is the link for your bed bar
http://www.performancepartswholesale.co ... 0104&Nty=1
- Viking
- Overseas Marshal
- Posts: 2634
- Joined: Mon Jan 21, 2008 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, Khalifa City A
I must say I am pretty impressed of the work you can find in Musaffah. I know of a shop that do stainless steel and they might be able to do something like this. I am not sure it will be the chromelook but powdercoated black or red to match your Dodge could be nice.
Let me know if you are interested and I will give you the directions
Let me know if you are interested and I will give you the directions
// Eric The Viking
Back in Sweden with many good memories from AD4x4
Back in Sweden with many good memories from AD4x4
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
-
- Posts: 312
- Joined: Fri Oct 05, 2007 9:00 am
- Location: Abu Dhabi
Bed Bars?? I only knew what you were talking about once I looked at the pictures.
South Africa and Australia will be the best places to look for ideas for a "ROLLBAR". Call them anything else and you will only get weird looks by any one from the Southern hemisphere,
In SA & OZ 80% of all 4x4s are pick-ups and all will be fitted with rollbars as a standard. These all bolt onto the bed of the pick-up and not onto the side as I have seen on pick-ups here and in Qatar. Boltong onto the side wall will not provide the protection required in the advent of a roll over.
Any good engineering firm with a half decent pipe bender should be able to manufacture a rollbar from a picture. I will ask my technicians who 4x4 in SA what schedule of pipe is used.
I will also look thru my SA4x4 books to see if there are any adverts with some ideas.
South Africa and Australia will be the best places to look for ideas for a "ROLLBAR". Call them anything else and you will only get weird looks by any one from the Southern hemisphere,
In SA & OZ 80% of all 4x4s are pick-ups and all will be fitted with rollbars as a standard. These all bolt onto the bed of the pick-up and not onto the side as I have seen on pick-ups here and in Qatar. Boltong onto the side wall will not provide the protection required in the advent of a roll over.
Any good engineering firm with a half decent pipe bender should be able to manufacture a rollbar from a picture. I will ask my technicians who 4x4 in SA what schedule of pipe is used.
I will also look thru my SA4x4 books to see if there are any adverts with some ideas.
Land Rover: if you cant fix it with a hammer you have an electrical problem
- Desert_Dragon
- Intermediate
- Posts: 638
- Joined: Fri Aug 01, 2008 9:00 am
- Location: Abu Dhabi
- Location: ABU DHABI
iguana thanks for the site...FINALLY i found what excatly i wants...BUT once i check out they dont offer any country except USiguana wrote:Check Performance Parts www.performanceparts.com they have it and they ship to UAE. I ordered some parts for my Durango from there.
This is the link for your bed bar
http://www.performancepartswholesale.co ... 0104&Nty=1
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
![Idea :idea:](./images/smilies/icon_idea.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Viking Plss show me the direction....let me see if they have agood customize bed bar.... We will check it no harm ... thanks for ur support
Avan thanks buddy
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Dodge Ram 2007 my First toy at AD4X4
Now Ford Raptor 2012
Now Ford Raptor 2012
- Desert_Dragon
- Intermediate
- Posts: 638
- Joined: Fri Aug 01, 2008 9:00 am
- Location: Abu Dhabi
- Location: ABU DHABI
coz i stopped to the shop which offer bed bar you talkin about in Salam st ... i asked him if he can arrange for my dodge...he answer me he got it from jabel ali as shippments for toyota parts!!!!heinz wrote:I know... thought maybe they would know where to find bar for dodge ram...Dodge_ram wrote:Heinz that was for Toyota pick up 2.4L 8O
good luck
Cheerz
Dodge Ram 2007 my First toy at AD4X4
Now Ford Raptor 2012
Now Ford Raptor 2012
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
Yes, I have a 2003 Durango V8 5.9L modified with Air Aid cold air intake, Air Aid TBS and Gibson Cat Back, but I only use it on road. It is a great shopping carDodge_ram wrote: Ahaa someone has Durango hereADMIT IT YOU LIKE DODGE
![]()
![]()
![Wink :wink:](./images/smilies/icon_e_wink.gif)
When I go offroad, I use my Wrangler or my wife's Jeep Liberty