Hey guys
Need urgently an cylinder head for the well known inline 6 with 4.0L. Dosn't matter Cherokee or wrangler. Would prefer an 2002 till 2006 head, but take any offered. Went thru the junk yards in AD and there in non for me.
Maybe somebody from sharja or dubai kenn keep his eyes open during the next round in there junk yards.
Any other advice is wellcome!!!
Need cylinder head jeep inline 6 / 4.0L
- Cybershot
- Advanced
- Posts: 791
- Joined: Fri Mar 02, 2007 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
- Gladiator
- Advanced
- Posts: 5445
- Joined: Mon Oct 29, 2007 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
- Contact:
Re: Need cylinder head jeep inline 6 / 4.0L
check with Qasrawi... Mussafah... he should have it
- SCORPIO
- Advanced
- Posts: 3102
- Joined: Tue Jul 07, 2009 11:18 pm
- Location: Abu Dhabi
- Location: Abu Dhabi
Re: Need cylinder head jeep inline 6 / 4.0L
there is a full engine for sale @ Dubizzle
check it if the price is good and you have a storage place
take it, and i wish you might not have any future problems
in other parts but in case it happened it will be easier for you
good luck
check it if the price is good and you have a storage place
take it, and i wish you might not have any future problems
in other parts but in case it happened it will be easier for you
good luck
YOU CAN NEVER SET OUT TO GET OUT FROM THIS LIFE ALIVE
- Cybershot
- Advanced
- Posts: 791
- Joined: Fri Mar 02, 2007 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Re: Need cylinder head jeep inline 6 / 4.0L
Any Location or phone Nr?Gladiator wrote:check with Qasrawi... Mussafah... he should have it
Could not find it in Dubizzle... any link?SCORPIO wrote:there is a full engine for sale @ Dubizzle
check it if the price is good and you have a storage place
take it, and i wish you might not have any future problems
in other parts but in case it happened it will be easier for you
good luck
- Gladiator
- Advanced
- Posts: 5445
- Joined: Mon Oct 29, 2007 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
- Contact:
Re: Need cylinder head jeep inline 6 / 4.0L
Any Location or phone Nr?Cybershot wrote:Gladiator wrote:check with Qasrawi... Mussafah... he should have it
call Amer Qasrawi 050 6176101 he is the owner..
- SSS
- Advanced
- Posts: 3227
- Joined: Thu Nov 05, 2009 12:44 am
- Location: Abu Dhabi
Re: Need cylinder head jeep inline 6 / 4.0L
jeep 4.0 I6L (2001) COMPLETE ENGINE:
http://ajman.dubizzle.com/classified/au ... -for-sale/
I think I told you about it once, no?
http://ajman.dubizzle.com/classified/au ... -for-sale/
I think I told you about it once, no?
chafik the SilverSandSurfer
"The more I know, the more I realize how much I don't know."
THE THUNDER Status: http://www.ad4x4.com/club/viewtopic.php?f=53&t=15808
"The more I know, the more I realize how much I don't know."
THE THUNDER Status: http://www.ad4x4.com/club/viewtopic.php?f=53&t=15808
- Cybershot
- Advanced
- Posts: 791
- Joined: Fri Mar 02, 2007 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Re: Need cylinder head jeep inline 6 / 4.0L
Thanks guys
Found One which supose to fit to my XJ hopefully
Looks like scrap .... ore am I wrong?
Found One which supose to fit to my XJ hopefully
Looks like scrap .... ore am I wrong?
- heinz
- Advanced
- Posts: 621
- Joined: Thu Aug 21, 2008 9:00 am
- Location: Abu Dhabi
- Location: gone sailing...
- Contact:
Re: Need cylinder head jeep inline 6 / 4.0L
Not all parts from the TJ engine will fit on the XJ. Here is a NAXJA thread on the exact subject:SSS wrote:jeep 4.0 I6L (2001) COMPLETE ENGINE:
http://ajman.dubizzle.com/classified/au ... -for-sale/
I think I told you about it once, no?
http://www.naxja.org/forum/showthread.p ... ngine+swap
A complete engine swap will not work easily since the mounting brackets are different. Also the mounting points for accesories like alternator, water pump, etc. are different. Actually a complete TJ engine will not fit in the motor bay of the XJ.
Have a browse on http://www.naxja.org. It is a really good source on info on the XJ.
Not all Jeeps have the same 4.0L block:
http://www.pera.org/articles/eb40319.htm wrote: The 1999–2001 Cherokee and 1999 Wrangler got a new block casting 53010449AA and guess what? The filter mounting face is now pointing downward again, just as it always did. Again, there are dowel pin holes in the deck and it uses a stud girdle. It is the first year of production of the new thrust plate design camshaft and associated machining of the block for the retaining bolts, which is what makes it unique.
The 1999-2004 model Grand Cherokee and 2000-2005 Wrangler have used what looks to be a clean sheet-design block. The front has a long ear on the lower left side that replaces a bolt-on mount. There are all kinds of different mounting bolt bosses on each side of the block, some metric, some not (see illustrations), and the filter mount is once again 90 degrees to the pan rail.
- Cybershot
- Advanced
- Posts: 791
- Joined: Fri Mar 02, 2007 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Re: Need cylinder head jeep inline 6 / 4.0L
Thanks Heinz for your hint. I checked casting Nr and details about the different 4.0 l heads.
I will need some modification, but I am planing "something" which shall be worth the hassle
I will need some modification, but I am planing "something" which shall be worth the hassle