BED BAR!!!!!

Itemas wanted and Group Orders
Post Reply
User avatar
Desert_Dragon
Intermediate
Intermediate
Posts: 638
Joined: Fri Aug 01, 2008 9:00 am
Location: Abu Dhabi
Location: ABU DHABI

BED BAR!!!!!

Post by Desert_Dragon »

Anyone can advise me where to buy or customize a bed bar in Abu Dhabi the same as showing below


Image

User avatar
iguana
Founder & Chairman
Founder & Chairman
Posts: 14551
Joined: Wed Jun 21, 2006 9:00 am
Location: Abu Dhabi
Location: Abu Dhabi, UAE
Contact:

Post by iguana »

I think this will be very difficult, why don't you order it online
Men don't get older, toys get more expensive
islam.mantawi@hotmail.com
0506224377

Kalemero
Newbie
Newbie
Posts: 1726
Joined: Thu Sep 28, 2006 9:00 am
Location: Abu Dhabi
Location: Abudhabi

Post by Kalemero »

try to go to black scorpion maybe he can do it for you
Zee Godzilla
15 Nissan SWB Fully modified & Ready

Its my way or the high way :D

TINTIN
Posts: 1391
Joined: Sat Apr 26, 2008 9:00 am
Location: Abu Dhabi
Location: Work.....as allways
Contact:

Post by TINTIN »

Why do you need one though Dodge. It'll ony make you heavier. 8O
Unless you plan on rolling the beast, then it may come in handy :lol: :lol: :lol:
050 880 2485
1998 ZJ 5.2L V8 (The Bulldog)
with stuff

And more to come.

{ZJ's ROOL ALL THE REST DROOL}

User avatar
heinz
Advanced
Advanced
Posts: 621
Joined: Thu Aug 21, 2008 9:00 am
Location: Abu Dhabi
Location: gone sailing...
Contact:

Post by heinz »

I was at the car shops on Salam street... i saw a bed bar there, i think it was for a Toyota Hilux, but maybe they can point you in the right direction...

User avatar
Desert_Dragon
Intermediate
Intermediate
Posts: 638
Joined: Fri Aug 01, 2008 9:00 am
Location: Abu Dhabi
Location: ABU DHABI

Post by Desert_Dragon »

heinz wrote:I was at the car shops on Salam street... i saw a bed bar there, i think it was for a Toyota Hilux, but maybe they can point you in the right direction...

Heinz that was for Toyota pick up 2.4L 8O

TINTIN to mountain light bar and for safety reason... i want it to be heavier from the back so the tires wont slipping...Also, for off road looks :wink:

Kalemero where is black scorpion???? location and phone number ... call me i lost ur number though loool

iguana i tried to order through internet but it's only ship to USA
Dodge Ram 2007 my First toy at AD4X4

Now Ford Raptor 2012

User avatar
iguana
Founder & Chairman
Founder & Chairman
Posts: 14551
Joined: Wed Jun 21, 2006 9:00 am
Location: Abu Dhabi
Location: Abu Dhabi, UAE
Contact:

Post by iguana »

If it only ship to USA, use Aramex shop and ship, they will give you a p. o. box number in USA where you can ship your items there and then Aramex will bring it to you in UAE
Men don't get older, toys get more expensive
islam.mantawi@hotmail.com
0506224377

User avatar
heinz
Advanced
Advanced
Posts: 621
Joined: Thu Aug 21, 2008 9:00 am
Location: Abu Dhabi
Location: gone sailing...
Contact:

Post by heinz »

Dodge_ram wrote:Heinz that was for Toyota pick up 2.4L 8O
I know... thought maybe they would know where to find bar for dodge ram...

good luck :D

User avatar
iguana
Founder & Chairman
Founder & Chairman
Posts: 14551
Joined: Wed Jun 21, 2006 9:00 am
Location: Abu Dhabi
Location: Abu Dhabi, UAE
Contact:

Post by iguana »

Check Performance Parts www.performanceparts.com they have it and they ship to UAE. I ordered some parts for my Durango from there.

This is the link for your bed bar

http://www.performancepartswholesale.co ... 0104&Nty=1
Men don't get older, toys get more expensive
islam.mantawi@hotmail.com
0506224377

User avatar
Viking
Overseas Marshal
Overseas Marshal
Posts: 2634
Joined: Mon Jan 21, 2008 10:00 am
Location: Abu Dhabi
Location: Abu Dhabi, Khalifa City A

Post by Viking »

I must say I am pretty impressed of the work you can find in Musaffah. I know of a shop that do stainless steel and they might be able to do something like this. I am not sure it will be the chromelook but powdercoated black or red to match your Dodge could be nice.
Let me know if you are interested and I will give you the directions
// Eric The Viking
Back in Sweden with many good memories from AD4x4

User avatar
iguana
Founder & Chairman
Founder & Chairman
Posts: 14551
Joined: Wed Jun 21, 2006 9:00 am
Location: Abu Dhabi
Location: Abu Dhabi, UAE
Contact:

Post by iguana »

If it is only for the look, then try mussafah workshops, if you are looking for protection, then you should get a reliable one. The roll cage is not only a metal pipe, if it is not installed properly, it will be more dangerous.
Men don't get older, toys get more expensive
islam.mantawi@hotmail.com
0506224377

Avan
Posts: 312
Joined: Fri Oct 05, 2007 9:00 am
Location: Abu Dhabi

Post by Avan »

Bed Bars?? I only knew what you were talking about once I looked at the pictures.

South Africa and Australia will be the best places to look for ideas for a "ROLLBAR". Call them anything else and you will only get weird looks by any one from the Southern hemisphere,

In SA & OZ 80% of all 4x4s are pick-ups and all will be fitted with rollbars as a standard. These all bolt onto the bed of the pick-up and not onto the side as I have seen on pick-ups here and in Qatar. Boltong onto the side wall will not provide the protection required in the advent of a roll over.

Any good engineering firm with a half decent pipe bender should be able to manufacture a rollbar from a picture. I will ask my technicians who 4x4 in SA what schedule of pipe is used.

I will also look thru my SA4x4 books to see if there are any adverts with some ideas.
Land Rover: if you cant fix it with a hammer you have an electrical problem

User avatar
Desert_Dragon
Intermediate
Intermediate
Posts: 638
Joined: Fri Aug 01, 2008 9:00 am
Location: Abu Dhabi
Location: ABU DHABI

Post by Desert_Dragon »

iguana wrote:Check Performance Parts www.performanceparts.com they have it and they ship to UAE. I ordered some parts for my Durango from there.

This is the link for your bed bar

http://www.performancepartswholesale.co ... 0104&Nty=1
iguana thanks for the site...FINALLY i found what excatly i wants...BUT once i check out they dont offer any country except US :twisted: :twisted: ..i guess i need to have P.O.Box with aramex to order through this site?? pls advice :idea: Ahaa someone has Durango here :roll: ADMIT IT YOU LIKE DODGE :D :D

Viking Plss show me the direction....let me see if they have agood customize bed bar.... We will check it no harm ... thanks for ur support

Avan thanks buddy :D :D
Dodge Ram 2007 my First toy at AD4X4

Now Ford Raptor 2012

User avatar
Desert_Dragon
Intermediate
Intermediate
Posts: 638
Joined: Fri Aug 01, 2008 9:00 am
Location: Abu Dhabi
Location: ABU DHABI

Post by Desert_Dragon »

heinz wrote:
Dodge_ram wrote:Heinz that was for Toyota pick up 2.4L 8O
I know... thought maybe they would know where to find bar for dodge ram...

good luck :D
coz i stopped to the shop which offer bed bar you talkin about in Salam st ... i asked him if he can arrange for my dodge...he answer me he got it from jabel ali as shippments for toyota parts!!!!

Cheerz
Dodge Ram 2007 my First toy at AD4X4

Now Ford Raptor 2012

User avatar
iguana
Founder & Chairman
Founder & Chairman
Posts: 14551
Joined: Wed Jun 21, 2006 9:00 am
Location: Abu Dhabi
Location: Abu Dhabi, UAE
Contact:

Post by iguana »

Dodge_ram wrote: Ahaa someone has Durango here :roll: ADMIT IT YOU LIKE DODGE :D :D
Yes, I have a 2003 Durango V8 5.9L modified with Air Aid cold air intake, Air Aid TBS and Gibson Cat Back, but I only use it on road. It is a great shopping car :wink: As JC says, it get stuck on the Wadi.

When I go offroad, I use my Wrangler or my wife's Jeep Liberty
Men don't get older, toys get more expensive
islam.mantawi@hotmail.com
0506224377

Post Reply