yes with slip yokes.
And chain ...
but one major thing : Now beginning from my engine until the end of my transfercase everything is bolton.
No more adapters, no weak 23 spline anymore. The NP261 is significantly stronger then the NP241 (it can handle the 600NM torque of my engine which is way over the specs of the 241 ) . It has a much wider chain and thicker gears as well as a much thicker mainshaft.
And if a part breaks, there is a big chance i can get a replacement part in equal quality here in the UAE.
As much as i fancy a gear driven transfercase - for the moment i fancy simplicity that simply works and rewards me with a working car ...
Project economic JK
- MalteJK
- Posts: 2028
- Joined: Sun May 29, 2011 11:19 pm
- Location: Dubai
- Contact:
Re: Project economic JK
http://www.oryx4x4.com
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
- luna
- Intermediate
- Posts: 348
- Joined: Mon Nov 21, 2011 4:46 pm
- Location: Dubai
- Location: Dubai- Mirdiff
Re: Project economic JK
MalteJK wrote:yes with slip yokes.
And chain ...
but one major thing : Now beginning from my engine until the end of my transfercase everything is bolton.
No more adapters, no weak 23 spline anymore. The NP261 is significantly stronger then the NP241 (it can handle the 600NM torque of my engine which is way over the specs of the 241 ) . It has a much wider chain and thicker gears as well as a much thicker mainshaft.
And if a part breaks, there is a big chance i can get a replacement part in equal quality here in the UAE.
As much as i fancy a gear driven transfercase - for the moment i fancy simplicity that simply works and rewards me with a working car ...
Did you get your car back :O !?
Jeep wrangler 2010. Additions: nope nothing...
We're never gonna survive unless we go a little crazy
We're never gonna survive unless we go a little crazy
-
- Advanced
- Posts: 314
- Joined: Tue Mar 16, 2010 10:53 pm
- Location: Abu Dhabi
Re: Project economic JK
Hallo There ,
I really love to follow this, it shows me that I know nothing at all about my Jeep
Good for me , fueling up is done at the gas station other wise I would be completly lost.
I really love to follow this, it shows me that I know nothing at all about my Jeep
Good for me , fueling up is done at the gas station other wise I would be completly lost.
- MalteJK
- Posts: 2028
- Joined: Sun May 29, 2011 11:19 pm
- Location: Dubai
- Contact:
Re: Project economic JK
Not yet - but i have now all necessary parts for the gearbox swap so far and they're working on putting it back together.luna wrote:Did you get your car back :O !?
I'll stop over on Saturday and see how far they got.
Once the gearbox & engine, flywheel transfercase and clutch is mounted again, my exhaust will be done once again at sahara
( my engine will be put 10cm more to the back - so the headers need to be shortened )...
http://www.oryx4x4.com
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
- luna
- Intermediate
- Posts: 348
- Joined: Mon Nov 21, 2011 4:46 pm
- Location: Dubai
- Location: Dubai- Mirdiff
Re: Project economic JK
best of luck !!! and hope to see you and your beast of a car on the sand soon!MalteJK wrote:Not yet - but i have now all necessary parts for the gearbox swap so far and they're working on putting it back together.luna wrote:Did you get your car back :O !?
I'll stop over on Saturday and see how far they got.
Once the gearbox & engine, flywheel transfercase and clutch is mounted again, my exhaust will be done once again at sahara
( my engine will be put 10cm more to the back - so the headers need to be shortened )...
Jeep wrangler 2010. Additions: nope nothing...
We're never gonna survive unless we go a little crazy
We're never gonna survive unless we go a little crazy
- ossme
- Marshal
- Posts: 2042
- Joined: Sat May 21, 2011 11:32 am
- Location: Abu Dhabi
- MalteJK
- Posts: 2028
- Joined: Sun May 29, 2011 11:19 pm
- Location: Dubai
- Contact:
Re: Project economic JK
I got everything assembled ... so the nv4500 + clutch + flywheel + transfercase (NP261) out of a 3500 hd silverado for 15000 aed...ossme wrote:How much did the NV4500 cost you ??
Progress:
Yesterday i went to 7p again and my car was neighboring with chafik's tj ... Engine is back in and has plenty of room in front now ( moved back 6 inch. All the mounts are done.
So today they'll take it to the exhaust shop ( sahara ) and redo the headers & cut the pipes a bit ... my A/C pump needs to be relocated from down left to the upper left, because its in the way of the mount & headers.
On top of that i'll try to get a jk clutch pedal and clutch pump & hose as well as the shifter boot as soon as possible.
On top of that i need to get my rear driveshaft cut again and altered to fit the TC output joint.
The gearbox is huge as well is the TC ... If this is not holding it ...
http://www.oryx4x4.com
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
- SCORPIO
- Advanced
- Posts: 3102
- Joined: Tue Jul 07, 2009 11:18 pm
- Location: Abu Dhabi
- Location: Abu Dhabi
Re: Project economic JK
hiMalteJK wrote:I got everything assembled ... so the nv4500 + clutch + flywheel + transfercase (NP261) out of a 3500 hd silverado for 15000 aed...ossme wrote:How much did the NV4500 cost you ??
Progress:
Yesterday i went to 7p again and my car was neighboring with chafik's tj ... Engine is back in and has plenty of room in front now ( moved back 6 inch. All the mounts are done.
So today they'll take it to the exhaust shop ( sahara ) and redo the headers & cut the pipes a bit ... my A/C pump needs to be relocated from down left to the upper left, because its in the way of the mount & headers.
On top of that i'll try to get a jk clutch pedal and clutch pump & hose as well as the shifter boot as soon as possible.
On top of that i need to get my rear driveshaft cut again and altered to fit the TC output joint.
The gearbox is huge as well is the TC ... If this is not holding it ...
can you help with Sahara exhaust shop location
thanks
YOU CAN NEVER SET OUT TO GET OUT FROM THIS LIFE ALIVE
- MalteJK
- Posts: 2028
- Joined: Sun May 29, 2011 11:19 pm
- Location: Dubai
- Contact:
Re: Project economic JK
just visited my car today ... *sniff* as i did last weekend of course as well ...
Status is : parts arrived and reassembly began. According to hisham he doesn*t need anything but he insists on doing
this stupid thing with the gm computer to emulate the jeep pulse input for the rpm gauge ...
Anyway he told me "by the end of next week" it will be finished.
of course i believe him.
Status is : parts arrived and reassembly began. According to hisham he doesn*t need anything but he insists on doing
this stupid thing with the gm computer to emulate the jeep pulse input for the rpm gauge ...
Anyway he told me "by the end of next week" it will be finished.
of course i believe him.
http://www.oryx4x4.com
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
“Some people never go crazy, What truly horrible lives they must live”
c.b.
#green Jk Sahara ( totally stock ) ( 2013 -
#green Jk Sport ( totally struck ) ( 2013 - 2013 )
#white nissan badroll(stuck) ( 2012-2013 )
#silver jk Sahara unlimited ( stock ) ( 2010- )
phone : 0567786537
lead: Newbie(2) Intermediate(11), Advanced(5)
- SSS
- Advanced
- Posts: 3227
- Joined: Thu Nov 05, 2009 12:44 am
- Location: Abu Dhabi
Re: Project economic JK
ok ... simple electrotechnical remark :
the crankshaft position sensor on the GM engine is a Hall sensor and uses +12V as feed !
the tach signal out coming from the GM computer through the Speartech Harness is providing what?
http://ls1tech.com/forums/15982459-post3.html
the crankshaft position sensor on the Jeep engines is a Hall type too ... but it uses a +5V sensor supply ...
the Jeep pcm driving your dash expects a different signal amplitude than the GM CKP/or the tach output will deliver ... if Hisham does not do some precautions he might fry your Jeep CPS input
(besides the pulse pattern / frequency differences )
I am really curious about the outcome
the crankshaft position sensor on the GM engine is a Hall sensor and uses +12V as feed !
the tach signal out coming from the GM computer through the Speartech Harness is providing what?
http://ls1tech.com/forums/15982459-post3.html
the crankshaft position sensor on the Jeep engines is a Hall type too ... but it uses a +5V sensor supply ...
the Jeep pcm driving your dash expects a different signal amplitude than the GM CKP/or the tach output will deliver ... if Hisham does not do some precautions he might fry your Jeep CPS input
(besides the pulse pattern / frequency differences )
I am really curious about the outcome
chafik the SilverSandSurfer
"The more I know, the more I realize how much I don't know."
THE THUNDER Status: http://www.ad4x4.com/club/viewtopic.php?f=53&t=15808
"The more I know, the more I realize how much I don't know."
THE THUNDER Status: http://www.ad4x4.com/club/viewtopic.php?f=53&t=15808