Abu Dhabi Off-Road Club Forums

Soo here we go again

Since my very first jeep was Scorpion so i thought i would continue the legacy with scorpion II
its a Black limited 2003 Jeep Liberty KJ (boring shopping car), hopefully with the right mods it will end up like the pictures.

So the initial list of mods are as below:

- 1.5" OME lift kit. (done)
- 2" Daystar spacers. (Ordered)
- Black GT Wheels. (Ordered)
- 32s MT Tires (yet to decide on the brand)
- ARB Snorkel.
- K&N filter.
- ARB 4.56 r&p and lockers

so lets see how it goes

Manual or Auto ?

picture looks cool
good luck

The car looks very cool, but if the tiers are big it will not effect the Differential.


Sent from my iPhone using Tapatalk

GooD LucK, visit http://jeepinbyal.com

cooool!

but 1.5" OME lift PLUS(!) 2" spacers? will become challenging with the independent front suspension
(is it possible to do a 1"-1.5" bodylift instead of the 2" spacers on that Jeep? would leave suspension angles in a sane range and still provide enough clearance for those 32"s!)

@ Abdul Qadir Nope and its an auto.
@ Adiga i already did they're waaaay too expensive
@ SSS thats the recommeded by the Liberty experts in jeepforum and lostjeeps so we will see

ok ... just read a bit ... Liberty KJ is unibody, so no body lift possible
good luck with your frankenlift

Just buy a Wrangler man ..

Looking forward to see the output ..

Good Luck Moe

SSS wrote:ok ... just read a bit ... Liberty KJ is unibody, so no body lift possible

You can lift the seats

Monster! I would five way if this car is behind me and wouldn't wait y
For you to flash.


Sent from my iPhone using Tapatalk

thx guys

just an update:

the libbys are a bit different than the wranglers -obivously- so i had to order for upper control arms and high angle cv shafts by jeepinbyall, the total lift of the car will be 4.5" and with the 33" tires i got around 7" over the normal liberty. so not bad will be posting some pics later on tonight. and yeah i had to cut the bumpers to accomodate the new tyres

below is another update on the intial list:

So the initial list of mods are as below:

- 2" OME lift kit. (installed)
- 2.5" Daystar spacers. (installed)
- Black GT Wheels. (installed)
- cutsom light bar (installed)
- kumho 33s MT Tires (installed)
- bumpers trimming (ongoing)
- longer upper control arms by JBA (ordered)
- CV shafts by JBA (ordered)
- ARB Snorkel. (yet to order)
- K&N filter. (yet to order)
- ARB 4.56 r&p and lockers by alloy USA (yet to order)
- stickers (never ending)

4" lift !

you will be as high as Khiwi's Rubicon !

latest pics

looks Cool , All the best

Regards,