Onboard Bushranger Maxair Compressor, pix

MegaMoe · Post by **MegaMoe** » Sun Sep 24, 2006 11:51 pm

After seeing how Khaiwi mounted the Maxair Compressor i decided to do the same thing, i went with Iguana -thx again

- to his friend and job done perfectly. by doing this i've saved space in my wrangler that we ofcourse need and no more wiring everytime i want to inflate the tyres.

pix:

iguana · Post by **iguana** » Mon Sep 25, 2006 8:45 am

Looks nice Moe. I think I will do the same this week also.

khaiwi · Post by **khaiwi** » Mon Sep 25, 2006 9:06 am

I think you need to clean the lense of the camera on ur mobile....... hehehehehehehe

It looks in the pic too close to the wiper bottle, will u be able to replace the air filter of the pump?

MegaMoe · Post by **MegaMoe** » Mon Sep 25, 2006 9:22 am

khaiwi wrote:I think you need to clean the lense of the camera on ur mobile....... hehehehehehehe

It looks in the pic too close to the wiper bottle, will u be able to replace the air filter of the pump?

Zats Vat Ve Call Night Vision, and yes i still can change the filter. 8)

khaiwi · Post by **khaiwi** » Mon Sep 25, 2006 9:32 am

ahaaa, wery wery jood..... I vas vonderin vhere iz za flash support in zee nite vijon ????

Mpenzi · Post by **Mpenzi** » Mon Sep 25, 2006 3:06 pm

That is a good idea but how about engine heat .May it damage the compressor?

MegaMoe · Post by **MegaMoe** » Mon Sep 25, 2006 3:54 pm

its already made to take high tempreture, and as i've seen also from Khaiwi -because i took this idea from him- he used it for a year and -mashallah- no problems.

khaiwi · Post by **khaiwi** » Mon Sep 25, 2006 5:00 pm

Yep, its been a year by now and alhamdulillah all fine, recently the power switch broke and stuck in the [ON] position, which is known for these air pumps, so I did not bother fixing it as the power cables are still not directly connected to the battery.

konradh · Post by **konradh** » Mon Sep 25, 2006 5:37 pm

Khaiwi, you should charge Moe for copyright rules on installation. He used you as test pad before he did it. See you guys have to mount in the engine bay, do like Patrols mount in the rear hidden away and enough hose to inflate your own Patrol + a few of other friends Wranglers. 8)

Adeel is enjoying this feature now am sure.

Mpenzi · Post by **Mpenzi** » Thu Sep 28, 2006 11:20 am

I have bought a huge heavy duty compressor from Dragon Mall for 120 dhs. and I thing I will do the same. Thanks guys.

khaiwi · Post by **khaiwi** » Fri Sep 29, 2006 1:02 am

Mpenzi wrote:heavy duty compressor from Dragon Mall

Best of luck dear mpenzi,

AFAK quality of products in Dragon mall is under doubt.......

iguana · Post by **iguana** » Fri Sep 29, 2006 1:05 am

khaiwi wrote:
Mpenzi wrote:heavy duty compressor from Dragon Mall
Best of luck dear mpenzi,

AFAK quality of products in Dragon mall is under doubt.......

Yes Mpenzi. I suggest that you try it first for 2 or 3 times before you start punching holes in your car and install it.

Mpenzi · Post by **Mpenzi** » Fri Sep 29, 2006 2:07 pm

Good Advise guys, Thanks