3.5 inch lift requirement
Posted: Sun Jun 19, 2016 4:03 pm
Hi Guys
This is my first post as i've heard a lot about professional advises from here.
I am planing to lift my JK 2012, 2 door from 2.5 to 3.5 inch.
I already have adj front and rear track bars and front and rear heavy duty bumpstops
Following is what I am planning to do
1. Suspension 3.5 (going for fox 2.5 series)
HELP ==> 2. Spring 3.5 (Rock Krawler or metal cloak plz advice)
HELP ==> 3. Front and Rear Drive shaft (teraflex or JE reel or USA alloy Plz advice)
HELP ==> 4. 8 Adj. Control Arms (metal clock or arb or core 4x4 or rock krawler plz advice)
Please let me know if there is anything else i should add for a smooth on raod and good off road performance.
Im planing to use 35inch tyre on it and the original fenders.
Best Regards
Ozy
This is my first post as i've heard a lot about professional advises from here.
I am planing to lift my JK 2012, 2 door from 2.5 to 3.5 inch.
I already have adj front and rear track bars and front and rear heavy duty bumpstops
Following is what I am planning to do
1. Suspension 3.5 (going for fox 2.5 series)
HELP ==> 2. Spring 3.5 (Rock Krawler or metal cloak plz advice)
HELP ==> 3. Front and Rear Drive shaft (teraflex or JE reel or USA alloy Plz advice)
HELP ==> 4. 8 Adj. Control Arms (metal clock or arb or core 4x4 or rock krawler plz advice)
Please let me know if there is anything else i should add for a smooth on raod and good off road performance.
Im planing to use 35inch tyre on it and the original fenders.
Best Regards
Ozy