Page 1 of 1
Air beadlock system
Posted: Tue Apr 24, 2018 11:36 am
by bisho
Hi
Appreciate your feedback and advice regarding the air beadlock system
Below link showing how it works
http://www.secondair.com.au/howitworks.htm
Bisho
Sent from my E6833 using Tapatalk
Re: Air beadlock system
Posted: Tue Apr 24, 2018 11:56 am
by Testinwork
Hi Bisho
You can do something similar and very cheaply by fitting an appropriately sized very shallow inner tube and matching the width of your rim's inner width, but it must be somehow more rigid or reinforced (by some material to prevent over-inflation, I will call it belt), you will still need to drill a hole for the valve to add the 2ndary tube this.
If planned properly and carefully, it would work.
Re: Air beadlock system
Posted: Tue Apr 24, 2018 12:02 pm
by bisho
Testinwork wrote:Hi Bisho
You can do something similar and very cheaply by fitting an appropriately sized very shallow inner tube and matching the width of your rim's inner width, but it must be somehow more rigid or reinforced (by some material to prevent over-inflation, I will call it belt), you will still need to drill a hole for the valve to add the 2ndary tube this.
If planned properly and carefully, it would work.
Thanks a lot
Sent from my E6833 using Tapatalk
Air beadlock system
Posted: Tue Apr 24, 2018 9:43 pm
by Hani AMJ
I don’t have personal experience with them but I will share what I heard.
They help reduce but not avoid pop outs. You will still get a pop out even with them installed and then it’s more work to put the tire back in place.
Re: Air beadlock system
Posted: Tue Apr 24, 2018 10:07 pm
by bisho
anTrax wrote:I don’t have personal experience with them but I will share what I heard.
They help reduce but not avoid pop outs. You will still get a pop out even with them installed and then it’s more work to put the tire back in place.
Thanks Hani
Sent from my E6833 using Tapatalk