Jeep Stroker 4,6 L Build up

Chuck · Post by **Chuck** » Tue Feb 13, 2007 10:28 pm

Hi Karim,
show us the lower back of your Ride and we can tell you.

But anyhow, why you ask ? It does not matter what axle you have. For longer shakels in the rear it does not matter at all. Just open a new thread. I will post than some pictures of my 8.25 Chrysler.

DiVeR · Post by **DiVeR** » Tue Feb 13, 2007 10:40 pm

Here is mine, i just took the picture, i think its DANA 35 but can you confirm it

This is the picture from the internet

and this is the Chrysler 8.25

Chuck · Post by **Chuck** » Tue Feb 13, 2007 11:23 pm

Hi Karim,

thats a Dana 35 C Clip

http://jeep.dn.ru/axles/images/d35cmini.jpg

Dana 44 ( build in from 1987 to 1991 )

http://jeep.dn.ru/axles/Dana44/images/d44mini.jpg

Chrysler 8.25 ( very reliable Axle )

http://jeep.dn.ru/axles/images/corporate8mini.jpg

Cheers

Uwe

Chuck · Post by **Chuck** » Sat Feb 17, 2007 5:44 pm

Some News:

Today i had a great success in solving the problem with this f....

Bolt for the camshaft.

It turned out, that the bolt which is needed for the 99 camshaft is not available in UAE and i had to wait for minimum 10 days more.

My initial plan to modify the existing screw i dropped, because this screw if it fails, could damage the whole engine ( too much risk ).

So i decided to change the camshaft into a 94 model ( as the block is also 94 ).

Al Jallaf had the right camshaft together with the right Sprocket and Bolt, yeah.

I went back to 7 P with the new camshaft and they will finish the engine now until monday or tuesday. Due to some other works which came in for them during my search for the screw the last couple of days, i only can bring the car now on saturday morning for the engine swap. They will need two days for the swap.

Power Pack i am coming !!!

iguana · Post by **iguana** » Sat Feb 17, 2007 6:01 pm

Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??

Chuck · Post by **Chuck** » Sat Feb 17, 2007 8:50 pm

iguana wrote:Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??

4,6 L on Monday next week

DiVeR · Post by **DiVeR** » Sat Feb 17, 2007 9:28 pm

Chuck wrote:
iguana wrote:Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??
4,6 L on Monday next week

Can't wait to race with you Chuck

Chuck · Post by **Chuck** » Sat Feb 17, 2007 10:39 pm

DiVeR wrote:
Chuck wrote:
iguana wrote:Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??
4,6 L on Monday next week
Can't wait to race with you Chuck

Hi Karim,

thanks for your good wishes. Hopefully i will not blow up the new engine during a "race" with you

Uwe

DiVeR · Post by **DiVeR** » Sat Feb 17, 2007 10:48 pm

Chuck wrote: Hi Karim,

thanks for your good wishes. Hopefully i will not blow up the new engine during a "race" with you

Uwe

Welcome back offroad Chuck

Waiting for any new updates on your red one. Drive safely 8)

DinoStroker · Post by **DinoStroker** » Mon Feb 19, 2007 11:22 pm

DiVeR wrote:
Chuck wrote:
iguana wrote:Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??
4,6 L on Monday next week
Can't wait to race with you Chuck

He's got to race against me too.

Chuck · Post by **Chuck** » Sun Feb 25, 2007 2:24 pm

Hi Guys,

latest News

The old heart is out...

the new heart is in

So - if nothing goes wrong - tommorow morning the engine will make its first firing.

abdalla · Post by **abdalla** » Sun Feb 25, 2007 11:22 pm

looking good chuck ... hope everything goes well

iguana · Post by **iguana** » Mon Feb 26, 2007 12:01 am

Congratulations Chuck .. So Finally your Monster is now Strocked and ready to race all those old slow Wranglers

Chuck · Post by **Chuck** » Mon Feb 26, 2007 2:49 pm

Its done !!!

The new engine is in, i drove already about 80 Km with it.

It runs very smooth, stabile idle, no high temperature or something.

It seems that the guys at Alyasy and Al Khatim made a very good job.

So far i can not feel so much more power, but that is because i drive it now with max. 2500 RPM. After a while i can accelerate more and than i believe the beast will roarr.

I will make a complete review of the costs when i have more time to.

asimayub · Post by **asimayub** » Mon Feb 26, 2007 3:12 pm

Well done !! Congratulations Chuck you are on road now, see you on sand soon.