Frankenstein: The Good, The Bad and The Ugly
- DinoStroker
- Posts: 453
- Joined: Sat Nov 25, 2006 10:00 am
- Location: Abu Dhabi
- Location: Al Ain, UAE
- Contact:
-
- Advanced
- Posts: 215
- Joined: Mon Apr 07, 2014 4:13 pm
- Location: Dubai
Re: Frankenstein: The Good, The Bad and The Ugly
Wishing Frankenstein a healthy year ahead.
- BlackBird
- Overseas Marshal
- Posts: 667
- Joined: Thu Dec 27, 2012 1:04 pm
- Location: Non UAE resident
- Location: Dana Compound, Al Khobar, KSA
Frankenstein: The Good, The Bad and The Ugly
Yippeee eye ayyy
having a motor-less moment, it's not good
M: +966 50 566 1003
M: +966 50 566 1003
- ossme
- Marshal
- Posts: 2037
- Joined: Sat May 21, 2011 11:32 am
- Location: Abu Dhabi
Re: Frankenstein: The Good, The Bad and The Ugly
mabrouk !
Hopefully things gets better from here on.![Smile :)](./images/smilies/icon_e_smile.gif)
Hopefully things gets better from here on.
![Smile :)](./images/smilies/icon_e_smile.gif)
Proud to be Ad4x4 Marshal. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
- DesertDawg
- Overseas Marshal
- Posts: 1302
- Joined: Mon Feb 21, 2011 10:13 pm
- Location: Abu Dhabi
Re: Frankenstein: The Good, The Bad and The Ugly
Alas not. I have a constant P0302 code (misfire cyl 2) and I am trying to hunt down cause. Cylinders 1&2 have a reduced compression to 5/6/7/8. Wondering if I have a head gasket failure. Will swap injectors around tonight to see if code moves. Also plan to swap out coil rail, but junkyard does not have any (they sell like hot cakes).
Have a Viper 6 wire ignition pack on order from Shatri and will replace coil rail with pack/leads and see if that solves issue.
Otherwise its head off again. Although I am close to jacking the car.
Have a Viper 6 wire ignition pack on order from Shatri and will replace coil rail with pack/leads and see if that solves issue.
Otherwise its head off again. Although I am close to jacking the car.
Travelling in my truck...
- DinoStroker
- Posts: 453
- Joined: Sat Nov 25, 2006 10:00 am
- Location: Abu Dhabi
- Location: Al Ain, UAE
- Contact:
Re: Frankenstein: The Good, The Bad and The Ugly
What are the compression numbers, and what do the plugs look like?
- DesertDawg
- Overseas Marshal
- Posts: 1302
- Joined: Mon Feb 21, 2011 10:13 pm
- Location: Abu Dhabi
Re: Frankenstein: The Good, The Bad and The Ugly
Plugs all look same:
1 & 2 150 others 175-180
Dave
I am assuming because the coil rail fires twice and the corresponding cyl does not throw a code, the coil rail is good?
1 & 2 150 others 175-180
Dave
I am assuming because the coil rail fires twice and the corresponding cyl does not throw a code, the coil rail is good?
You do not have the required permissions to view the files attached to this post.
Travelling in my truck...
- DesertDawg
- Overseas Marshal
- Posts: 1302
- Joined: Mon Feb 21, 2011 10:13 pm
- Location: Abu Dhabi
Re: Frankenstein: The Good, The Bad and The Ugly
Just to be clear, the engine (at below 4k) goes well, and you would not know there is a misfire. It is just throwing the P0302 code.
P0302 code:
Misfire is detected by the crankshaft speed fluctuation (CSF) method. This method compares the engine speed difference between the cylinders in firing order. The speed is detected by the crankshaft position sensor. An RPM value is set for each cylinder for comparison. When an RPM difference of more than 10 RPM between the cylinders, a misfire count of 1 is recorded. The RPM can vary 1 to 10 RPM depending on engine load. Two types of misfires are detected, a two-trip misfire which is about 2% and results in an emission increase, or a one-trip misfire which is about 10% - 30% and will damage the catalytic converter.
Mine starts as a pending code and eventually sets the CEL.
I all have a high rpm/load issue which causes PCM to cut engine until restarted. Probably related.
P0302 code:
Misfire is detected by the crankshaft speed fluctuation (CSF) method. This method compares the engine speed difference between the cylinders in firing order. The speed is detected by the crankshaft position sensor. An RPM value is set for each cylinder for comparison. When an RPM difference of more than 10 RPM between the cylinders, a misfire count of 1 is recorded. The RPM can vary 1 to 10 RPM depending on engine load. Two types of misfires are detected, a two-trip misfire which is about 2% and results in an emission increase, or a one-trip misfire which is about 10% - 30% and will damage the catalytic converter.
Mine starts as a pending code and eventually sets the CEL.
I all have a high rpm/load issue which causes PCM to cut engine until restarted. Probably related.
Travelling in my truck...
-
- Posts: 14
- Joined: Sun Sep 15, 2013 9:08 am
- Location: Abu Dhabi
Re: Frankenstein: The Good, The Bad and The Ugly
Dave, my first thought is that if both no 1 & 2 cylinders are down on compression compared to the rest then the gasket has probably blown between them.
- DesertDawg
- Overseas Marshal
- Posts: 1302
- Joined: Mon Feb 21, 2011 10:13 pm
- Location: Abu Dhabi
Re: Frankenstein: The Good, The Bad and The Ugly
Dear AD4x4 Friends,
Frankenstein has moved on and it is time, after 43 pages, to close this thread.
I in no way regret buying this XJ – I have met so many people because of it and I now know Mussafah like the back of my hand.
I would like to thank everybody who has helped me along the way:
Frankenstein has stayed within the club and I look forward to seeing it out and about.
Best Regards
David
Frankenstein has moved on and it is time, after 43 pages, to close this thread.
I in no way regret buying this XJ – I have met so many people because of it and I now know Mussafah like the back of my hand.
I would like to thank everybody who has helped me along the way:
- XOF – for selling it to me in the first place!
- Chief and Mood for pulling it out of the biggest bowl in Liwa after having abandoned it overnight and countless others who have pulled me out of the desert.
- Shadi for letting me steal his starter motor and then promptly losing it in the sand (we found it later)
- WaqMaster and Triplod for driving me back to Frankenstein having abandoned it overnight after said starter motor failed.
- Thom for staying with me after it refused to start (only to find out a fuse had blown)
- Chafik and Dino for countless hours of technical advice.
- BlackBird for general encouragement.
Frankenstein has stayed within the club and I look forward to seeing it out and about.
Best Regards
David
Travelling in my truck...
- DinoStroker
- Posts: 453
- Joined: Sat Nov 25, 2006 10:00 am
- Location: Abu Dhabi
- Location: Al Ain, UAE
- Contact:
Re: Frankenstein: The Good, The Bad and The Ugly
Long live Frankie.
So have you got Frankie II lined up yet Dave?
So have you got Frankie II lined up yet Dave?
- abualabed
- Advanced
- Posts: 2981
- Joined: Wed Mar 06, 2013 2:23 pm
- Location: Abu Dhabi
- Location: abu dhabi
Frankenstein: The Good, The Bad and The Ugly
God help the new payer.
Hhhhhh
Hhhhhh
khaled awadallah
0558992870
0558992870
- Thom
- Advanced
- Posts: 1918
- Joined: Fri Mar 23, 2012 2:08 pm
- Location: Abu Dhabi
- Location: SBR, Abu Dhabi
Frankenstein: The Good, The Bad and The Ugly
Looking forward to joining many more trips with Frankie! ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
___________________________
Thom
0566017533
JK 2012 - "White Rhino"
F150 FX4 2014 - "Canis Majoris"
FB - https://www.facebook.com/profile.php?id=100005220737029
Thom
0566017533
JK 2012 - "White Rhino"
F150 FX4 2014 - "Canis Majoris"
FB - https://www.facebook.com/profile.php?id=100005220737029