Steel Stockholders

Dedicated forums for members projects and DIY guides
Post Reply
nigel123
Intermediate
Intermediate
Posts: 182
Joined: Fri Apr 27, 2012 7:52 pm
Location: Abu Dhabi

Steel Stockholders

Post by nigel123 »

I have a 'Rotapax' spare tyre fuel system that relys on a ratchet strap to secure it, last week whilst spectating at 'Desnav' it became obvious that in the terrain we drive this is not enough, I have thought of a way to secure it, which involves using a flat steel plate with threaded rod.

I need to find somewhere in Abu Dhabi that stocks a piece of flat steel 35'' long X 2'' X 1/4''.

Any help would be appreciated as I dont want to loose the system on the highway.

Nigel 123 8-)

User avatar
DesertDawg
Overseas Marshal
Overseas Marshal
Posts: 1302
Joined: Mon Feb 21, 2011 10:13 pm
Location: Abu Dhabi

Re: Steel Stockholders

Post by DesertDawg »

Mussafah is your destination. The municpality seems to have pushed all the old places away from the island.

There are plenty of blacksmiths there if you need some welding done on your bracket.

This is the area you want to head for: 24 22.235 54 30.901 (DD MM.MMM). There are blacksmiths, nut and bolt shops and steel merchants.

You might see me there, I seem to spend my life there getting Frankenstein fixed.

Dave
Travelling in my truck...

User avatar
Abdul Qadir
Marshal
Marshal
Posts: 2943
Joined: Mon Mar 26, 2012 7:40 pm
Location: Abu Dhabi
Location: MBZ Abu Dhabi
Contact:

Re: Steel Stockholders

Post by Abdul Qadir »

Mussafah off course
0501212499

The way we see the problem is the problem.

User avatar
Vader
Advanced
Advanced
Posts: 367
Joined: Wed Dec 15, 2010 5:50 pm
Location: Abu Dhabi

Re: Steel Stockholders

Post by Vader »

DesertDawg wrote:Mussafah is your destination. The municpality seems to have pushed all the old places away from the island.

There are plenty of blacksmiths there if you need some welding done on your bracket.

This is the area you want to head for: 24 22.235 54 30.901 (DD MM.MMM). There are blacksmiths, nut and bolt shops and steel merchants.

You might see me there, I seem to spend my life there getting Frankenstein fixed.

Dave
Hey Dave,

Any particular shop in that area that you recommend? I want to fabricate a longer/tougher mount for my flag (those red ones from Ramy), they come with a small nut mount which is really designed for CB antennas and don't last very long, the thread gets worn out easily and I think that it's made out of copper... :dash1:
راعي الربع

User avatar
Abdul Qadir
Marshal
Marshal
Posts: 2943
Joined: Mon Mar 26, 2012 7:40 pm
Location: Abu Dhabi
Location: MBZ Abu Dhabi
Contact:

Re: Steel Stockholders

Post by Abdul Qadir »

24°22'26.90"N 54°30'42.01"E

Check this shop I did some fabrication there, they are good enough.
0501212499

The way we see the problem is the problem.

User avatar
DesertDawg
Overseas Marshal
Overseas Marshal
Posts: 1302
Joined: Mon Feb 21, 2011 10:13 pm
Location: Abu Dhabi

Re: Steel Stockholders

Post by DesertDawg »

Not a recommendation as such, but Kamal Hossain at Abdul Nasser Weld Foundry Shop can do very basic fabrication.

As in drill a hole here. Cut a slot here, bend it. Now weld it up. Don't expect to give him a drawing.

Here he is at work...
Abu Dhabi-20130223-00281.jpg
Health and safety would have a field day...

His shop is here N24 22.235 E54 30.903

Dave
You do not have the required permissions to view the files attached to this post.
Travelling in my truck...

nigel123
Intermediate
Intermediate
Posts: 182
Joined: Fri Apr 27, 2012 7:52 pm
Location: Abu Dhabi

Re: Steel Stockholders

Post by nigel123 »

Thanks for the coordinates, unfortunately my job is QHSE Director so I might feel a little challenged down there but on the plus side might get some great pics for my presentations, heading down that way tomorrow maybe see you there.

Nigel 123 8-)

User avatar
khaluf
Intermediate
Intermediate
Posts: 128
Joined: Sun Feb 13, 2011 7:53 am
Location: Abu Dhabi

Re: Steel Stockholders

Post by khaluf »

DesertDawg wrote:Not a recommendation as such, but Kamal Hossain at Abdul Nasser Weld Foundry Shop can do very basic fabrication.

As in drill a hole here. Cut a slot here, bend it. Now weld it up. Don't expect to give him a drawing.

Here he is at work...
Abu Dhabi-20130223-00281.jpg
Health and safety would have a field day...

His shop is here N24 22.235 E54 30.903

Dave
seems to be the standard work shop found in Kot Addu in Pakistan where we did a lot of valves repair and motor rewinding just keeping power plant running: the gentleman is definitely the same

Post Reply