Jeep Stroker 4,6 L Build up
- Chuck
- Advanced
- Posts: 898
- Joined: Fri Nov 24, 2006 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
- DiVeR
- Advanced
- Posts: 3038
- Joined: Wed Oct 25, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Here is mine, i just took the picture, i think its DANA 35 but can you confirm it
This is the picture from the internet
and this is the Chrysler 8.25
This is the picture from the internet
and this is the Chrysler 8.25
This email address is being protected from spambots. You need JavaScript enabled to view it. (Member #70)
Two amazing places: Underwater & Offroad
Karim
Two amazing places: Underwater & Offroad
Karim
- Chuck
- Advanced
- Posts: 898
- Joined: Fri Nov 24, 2006 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Hi Karim,
thats a Dana 35 C Clip
http://jeep.dn.ru/axles/images/d35cmini.jpg
Dana 44 ( build in from 1987 to 1991 )
http://jeep.dn.ru/axles/Dana44/images/d44mini.jpg
Chrysler 8.25 ( very reliable Axle )
http://jeep.dn.ru/axles/images/corporate8mini.jpg
Cheers
Uwe
thats a Dana 35 C Clip
http://jeep.dn.ru/axles/images/d35cmini.jpg
Dana 44 ( build in from 1987 to 1991 )
http://jeep.dn.ru/axles/Dana44/images/d44mini.jpg
Chrysler 8.25 ( very reliable Axle )
http://jeep.dn.ru/axles/images/corporate8mini.jpg
Cheers
Uwe
- Chuck
- Advanced
- Posts: 898
- Joined: Fri Nov 24, 2006 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Some News:
Today i had a great success in solving the problem with this f.... Bolt for the camshaft.
It turned out, that the bolt which is needed for the 99 camshaft is not available in UAE and i had to wait for minimum 10 days more.
My initial plan to modify the existing screw i dropped, because this screw if it fails, could damage the whole engine ( too much risk ).
So i decided to change the camshaft into a 94 model ( as the block is also 94 ).
Al Jallaf had the right camshaft together with the right Sprocket and Bolt, yeah.
I went back to 7 P with the new camshaft and they will finish the engine now until monday or tuesday. Due to some other works which came in for them during my search for the screw the last couple of days, i only can bring the car now on saturday morning for the engine swap. They will need two days for the swap.
Power Pack i am coming !!!
Today i had a great success in solving the problem with this f.... Bolt for the camshaft.
It turned out, that the bolt which is needed for the 99 camshaft is not available in UAE and i had to wait for minimum 10 days more.
My initial plan to modify the existing screw i dropped, because this screw if it fails, could damage the whole engine ( too much risk ).
So i decided to change the camshaft into a 94 model ( as the block is also 94 ).
Al Jallaf had the right camshaft together with the right Sprocket and Bolt, yeah.
I went back to 7 P with the new camshaft and they will finish the engine now until monday or tuesday. Due to some other works which came in for them during my search for the screw the last couple of days, i only can bring the car now on saturday morning for the engine swap. They will need two days for the swap.
Power Pack i am coming !!!
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
- DiVeR
- Advanced
- Posts: 3038
- Joined: Wed Oct 25, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Can't wait to race with you ChuckChuck wrote:4,6 L on Monday next weekiguana wrote:Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??
This email address is being protected from spambots. You need JavaScript enabled to view it. (Member #70)
Two amazing places: Underwater & Offroad
Karim
Two amazing places: Underwater & Offroad
Karim
- Chuck
- Advanced
- Posts: 898
- Joined: Fri Nov 24, 2006 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
- DiVeR
- Advanced
- Posts: 3038
- Joined: Wed Oct 25, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Chuck wrote: Hi Karim,
thanks for your good wishes. Hopefully i will not blow up the new engine during a "race" with you
Uwe
Welcome back offroad Chuck Waiting for any new updates on your red one. Drive safely 8)
This email address is being protected from spambots. You need JavaScript enabled to view it. (Member #70)
Two amazing places: Underwater & Offroad
Karim
Two amazing places: Underwater & Offroad
Karim
- DinoStroker
- Posts: 453
- Joined: Sat Nov 25, 2006 10:00 am
- Location: Abu Dhabi
- Location: Al Ain, UAE
- Contact:
He's got to race against me too.DiVeR wrote:Can't wait to race with you ChuckChuck wrote:4,6 L on Monday next weekiguana wrote:Congratulations Chuck ... so we will see Red powered by a 4.7 on Tueseday ??
1992 Jeep Cherokee - 4.6L Stroker - 5MT
200rwhp 258rwtq (246hp 311lbft at crank)
Jeep Performance, Jeep Tech, Junker to Stroker
200rwhp 258rwtq (246hp 311lbft at crank)
Jeep Performance, Jeep Tech, Junker to Stroker
- iguana
- Founder & Chairman
- Posts: 14551
- Joined: Wed Jun 21, 2006 9:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi, UAE
- Contact:
- Chuck
- Advanced
- Posts: 898
- Joined: Fri Nov 24, 2006 10:00 am
- Location: Abu Dhabi
- Location: Abu Dhabi
Its done !!!
The new engine is in, i drove already about 80 Km with it.
It runs very smooth, stabile idle, no high temperature or something.
It seems that the guys at Alyasy and Al Khatim made a very good job.
So far i can not feel so much more power, but that is because i drive it now with max. 2500 RPM. After a while i can accelerate more and than i believe the beast will roarr.
I will make a complete review of the costs when i have more time to.
The new engine is in, i drove already about 80 Km with it.
It runs very smooth, stabile idle, no high temperature or something.
It seems that the guys at Alyasy and Al Khatim made a very good job.
So far i can not feel so much more power, but that is because i drive it now with max. 2500 RPM. After a while i can accelerate more and than i believe the beast will roarr.
I will make a complete review of the costs when i have more time to.
Last edited by Chuck on Mon Feb 26, 2007 7:30 pm, edited 1 time in total.